Resin Cleaner PR-70
● Packaging Unit
▶ Aerosol 420ml/can, 20cans/Box
▶ 500g/can, 20cans/Box
● Features
- PR-70 made drastic improvement on the problem of carcinogenicity in the existing paint remover products.
This low-toxic product does not contain methylene chloride and phenol.
Safe to all types of metal, it produces powerful lifting effect to simply remove gasket, paint, enamel, adhesive mark and carbides formed on dies.
In particular, the strong permeability and solvency enable effective removal of gasket and paint.
Also, with fluidity, PR-70 penetrates deep into the hard-to-reach areas.
Made up compounds with no carcinogenicity, PR-70 has been designed as the optimal product for safety of human body.
▶ Safety without carcinogenicity and powerful solvency.
▶ Quick dispersion and strong permeability.
● Uses
▶ Removing gasket and paint
▶ Lifting off enamel, lacquer and varnish layers
▶ Removing adhesive marks
▶ Removing carbides on molds generated during projection molding
▶ Removing carbon residues
▶ Lifting off enamel layer from copper wire
▶ Washing off oils strongly adhered to surface by heat
● How to use
▶ Spray Method :
Evenly apply product on the item to be cleaned.
Wait for approximately 30 ~ 40 minutes, then scrub the area with a scraper or brush to remove the paint layer.
▶ Dipping Method :
When the target item is dipped in the cleaning liquid for a long period of time, the chemical reaction generates lifting effect. Then, the paint layer becomes expanded and begins to scale off. When the painted layer is completed lifted, wipe the surface with soft cloth or wash the layer off with high-pressure jet water.
● Cautions
▶ Store in well-ventilated area with temperature of 40℃ or less.
▶ When product is in contact with skin, immediately wash it off with water.
▶ When product is in contact with eye, immediately wash it off with water and follow doctor’s instruction.
▶ When product is in contact with clothes, immediately take off and wash clothes.
▶ Take caution and when opening the lid of product container.
Due to the pressure inside, the lid may pop when opening. Grad the lid by covering it with cloth and slowly open it.