Application of V-MAX GROUT PG-600
1. Complete non-shrinkage property
2. Final finishing dimension is accurate
3. NON-METALLIC (Non metallic group, ACTIVATED CARBON
4. Economic efficiency
5. Workability is fine.
6. Excellent compression strength, tensile strength, and adhesion strength

Application method (VMG PREMIX):
1. Before using the product, remove foreign material from the applying section, and make wet the section sufficiently with water, and remove the stagnated water on the surface before pouring the grout, or perform the construction work after applying uniformly the crack prevention agent (PROTEC) of this company to the pouring section.
2. When mixing the grout, add accurate quantity of water. The water quantity per 1 bag of VMG PG-600 (25Kg) is as follows.
- Thin dough: 4 LITER(water/product= 18%)
- Thick dough: 3.75 LITER(Water/product= 13%)
3. 1950-2000Kg of VMG PG-600 will be used per 1m3.
4. Continue the mixing while charging accurate quantity of water into the mixing device and inputting slowly the VMG.
5. When all the materials are inputted, the mixing shall be continued for at least 5 minutes more, and the product for which the mixing has been completed shall be used within 30 minutes.
6. When applying, prevent the inflow of air by performing the one sided pouring continuously.
7. When the work is completed, immediately maintain the wet state of the exposed surface with curing blanket or curing agent etc., and continue the water spraying around 37 days after the hardening.

▣ In the case of the GROUT test of ASTM, important tests which must be checked from the grout product are as follows.