Outline
This is used to make easy the detachment of form and to obtain clean concrete surface by forming thin film between the form and concrete
Characteristics
1. Detachment of form is easy and the concrete surface can be finished in good shape.
2. After the detachment of form, there will not be any stain on the surface, and it will exert no influence to the paint work.
3. As concrete is not adhered to the form, there is time saving effect during the re-application.
4, Internally, there is anti-rust and preservation effects
5. As coating is easy, time and expenses will be saved.
6. This is more economical than using light oil or heavy oil.
Application method
-FORM OIL-TW(Aqueous)
1. Dilute 4~10 times of water into the original liquid of FORM OIL-TW.
2. In the case of using this at the first time, perform the 1st coating to the form, and if the surface is dried, conduct the 2nd coating again.
3. In the case of using the form continuously. perform the application after conducting the 1st coating of the dilution liquid.
4, Perform the coating with spray, brush, roller, or cotton floor cloth.
-FORM OIL-TO(Oily)
1. In the case of the oily FORM OIL-TO, use the original liquid directly.
2. Other items are the same as that of the aqueous
Cautions:
1.When using the FORM OIL-T (aqueous), perform sufficient mixing until it becomes the color of thick milk.
2. Use the form with good drying state only.
3. Avoid snow, rain for around 3 hours after the coating.
Packaging
200L/DRUM or 20L/CAN