KS M 6030 Class1 Grade 2
1. Product Description
- KS M 6020 Class1 Grade 2 is long oil Alkyd Resin, Red lead and Red Iron Oxide Based, AntiCorrosive primer that is designed for use on steel surface to protect Against corrosion
2. Recommended Uses
- Primer for Steel Structures
- Bridges and machinery
3. Features
- Long term AntiCorrosion Property
- Good Adhesion and water Resistance
- Good penetrating property to substrate
4. Physical properties
Drying time (20℃) |
set to touch | 2 hours |
Dry hard | 12 hours |
Theoretical coverage (DFT 40μm) |
Volume solids (%) | 62 |
Theoretical coverage (㎡/L) | 15.5 |
Drying time (20℃) |
set to touch | 2 hours |
Dry hard | 12 hours |
Theoretical coverage (DFT 40μm) |
Volume solids (%) | 62 |
Theoretical coverage (㎡/L) | 15.5 |
5. Application procedures
- Surface preparation : Remove dust, oil, grease, moisture and any other contaminant
- Application condition : surface temperature must be at least 3℃ above dew point to prevent condensation and relative humidity must be below 85%
- Application Equipment : Brush, Air Spray, Roller
- Thinner : Use the recommended KSM-6060 Class1, Class2 thinner
- Thinning ratio : 30~50% (by volume)
- Recoating time : max. 15 days
6. Application information
- Do not apply above 85% R.H. and below 5℃.
- Optimum application Temperature is suitable for 5 ~ 40 ℃ and surface Temperature must be at least 3℃ above dew point to prevent condensation.
- Do not mix with other paint.
- Remove dust, oil, grease and any other contaminant.
- Stir thoroughly before using.
- Use the recommended thinner.
- Apply the Recommended coverage to achieve optimum performance and do not apply above the Recommended coverage per coat.
- Wear suitable protective Equipment During Application.
7. Precautions
- Read the Material Safety Data Sheet.
- Avoid contact with eyes.
- Keep out of reach of children.
- Use only in well ventilated areas.
- Do not intentionally breathe vapour.
- Keep away from flames or sparks.
- If in contact with eyes, rinse thoroughly with clean water.