Q.D DS AntiCorrosive Primer
1. Product Description
- Q.D DS Anticorrosive Primer is Acrylic Resin and Red Iron oxide Based, Fast Drying primer that is Designed for use on metal surfaces to protect against corrosion
2. Recommended Uses
- Primer for Steel
3. Features
- Good AntiCorrosion
- Good Adhesion
- Fast Drying
- Good water and Salt water Resistance
4. Physical properties
Drying time (20℃) |
set to touch | 10 mins |
Dry hard | 1 hour |
Theoretical coverage (DFT 30μm) |
Volume solids (%) | 49 |
Theoretical coverage (㎡/L) | 16.3 |
Drying time (20℃) |
set to touch | 10 mins |
Dry hard | 1 hour |
Theoretical coverage (DFT 30μm) |
Volume solids (%) | 49 |
Theoretical coverage (㎡/L) | 16.3 |
5. Application procedures
- Surface preparation : Remove dust, oil, grease, moisture and any other contaminant
- Application condition : surface temperature must be at least 3℃ above dew point to prevent condensation and relative humidity must be below 85%
- Application Equipment : Brush, Air Spray, Roller
- Thinner : Use the recommended Quick Drying thinner
- Recommended Top Coat : Air drying Enamel, Ready mixed paint, Quick Drying Enamel Finish
- Recoating time : min. 2 hours
6. Application information
- Do not apply above 85% R.H. and below 5℃.
- Optimum application Temperature is suitable for 5 ~ 40 ℃ and surface Temperature must be at least 3℃ above dew point to prevent condensation.
- Do not mix with other paint.
- Remove dust, oil, grease and any other contaminant.
- Stir thoroughly before using.
- Use the recommended thinner.
- Apply the Recommended coverage to achieve optimum performance and do not apply above the Recommended coverage per coat.
- Wear suitable protective Equipment During Application.
7. Precautions
- Read the Material Safety Data Sheet.
- Avoid contact with eyes.
- Keep out of reach of children.
- Use only in well ventilated areas.
- Do not intentionally breathe vapour.
- Keep away from flames or sparks.
- If in contact with eyes, rinse thoroughly with clean water.