Appearance | Clear Liquid |
Viscosity | 2~3cps |
Specific Gravity | 1.1 |
Ingredients | Etyl cyanoacrylate |
Solubility | Acetone |
Flash Point | 85℃ |
Set Time, Tensile strength
Materials | time (sec) | Tensile strength |
vinyl chloride | 5 ~ 10 | 6 |
Metal Plate | 10 ~ 20 | 15 |
Aluminium | 5 ~ 15 | 8 |
ABS | 5 ~ 10 | 6 |
PC | 5 ~ 10 | 8 |
NBR | 5 ~ 10 | 5 |
1) cps : centi poise (Water is 1.01 cps at 20℃)
2) Test method : JIS k6861(1997) for cyanoacrylate
3) * : meterials were broken while testing
Packing Unit
- 5g : 30ea/inbox, 900ea/1CT
How to use WJ-10
1) Wipe off the rust, dust, moisture and other contaminants from the surface of the objects.
2) Push both sides of the child safety can and open it.
3) Penetrate the nozzle using red pin.
4) Apply adhesive on the only single surface as small volume as possible(Large amount can cause blooming)
5) Press the two surface together firmly for 5 to 10 seconds.
Bond terms
- Working time: It is the time that a mixture is able to coat after two liquid stirring a mixture. (Usually the initial viscosity will be double times or nearly 60% of peak heating time.)
- Setting time: It is the time that bond strength and physical properties(tensile, compression, hardness, etc.) are almost stable.
- Tensile strength : It is result of maximum load divided by the area, when the applied adhesive things then test for tensile strength.
- Thixotropy : It is gel in the stationary status. Only it turns to liquidity as application of agitation or vibration. After leaving it, it turn back to the gel status.