702
Introduce
- Low viscosity (2 ~ 3cps)
- Fast Adhesion
- Suitable for metals, rubber, plastics, ceramics, etc.
- Common type multi-purpose adhesive.
Feature
Appearance | Clear Liquid |
Viscosity | 2~3cps |
Specific Gravity | 1.04 ~ 1.08 |
Ingredients | cyanoacrylate |
Solubility | Acetone |
Flash Point | 85℃ |
Set Time, Tensile strength
Materials | time (sec) | Tensile strength |
Chloroprene | 05 ~ 10 | 5* |
Metal Plate | 10 ~ 20 | 110 |
Stainless Steel | 10 ~ 20 | 110 |
ABS | 10 ~ 20 | 55* |
Acryloyl | 05 ~ 10 | 60* |
NBR | 05 ~ 10 | 5* |
1) cps : centi poise (Water is 1.01 cps at 20℃)
2) Test method : JIS k6861(1997) for cyanoacrylate
3) * : meterials were broken while testing
Packing Unit
- 50g : 20ea/inbox, 240ea/1CT
- Others : 5g, 20, 10g, 100g, 150g, 500g, 1kg, 2kg, 20kg
( Please contact us before order.)
How to use general adhesives
1) Wipe off the rust, dust, moisture and other contaminants from the surface of the objective.
2) Penetrate the nozzle using red pin.
3) Apply adhesive on the only single surface as small volume as possible (Large amount can cause whtiening)
4) Press the two surface together firmly for 5 to 10 seconds.
Bond terms
- Working time: It is the time that a mixture is able to coat after two liquid stirring a mixture. (Usually the initial viscosity will be double times or nearly 60% of peak heating time.)
- Setting time: It is the time that bond strength and physical properties(tensile, compression, hardness, etc.) are almost stable.
- Tensile strength : It is result of maximum load divided by the area, when the applied adhesive things then test for tensile strength.
- Thixotropy : It is gel in the stationary status. Only it turns to liquidity as application of agitation or vibration. After leaving it, it turn back to the gel status.