Fine Chemistry > Silicon > Silicone Release
Price |
$88.5 |
---|---|
Hot Price |
40%$53.10 |
Model name |
SYLGARD™ 184 Silicone Elastomer |
Usage |
Optical encapsulation, solar cell adhesion, sensors, etc. |
Base Material |
. |
Packging Unit |
500g, 19.9kg |
File Attachment |
SYLGARD™184 TDS.pdf |
Hot Price
You can purchase the product at a lower price through Chemknock.
40% OFF
Model name | SYLGARD™ 184 Silicone Elastomer | Usage | Optical encapsulation, solar cell adhesion, sensors, etc. |
---|---|---|---|
Base Material | . | Packaging Unit | 500g, 19.9kg |
SYLGARD™ 184 Silicone Elastomer
Transparent encapsulant with good flame resistance
FEATURES & BENEFITS
• Flowable
• Room temperature and heat cure
• Good dielectric properties
• Rapid, versatile cure processing controlled by temperature
• High transparency allows easy inspection of components
Composition
• Two-part
• 10 to 1 mix ratio
• Polydimethylsiloxane elastomer
Applications
Property | Unit | Result |
One or Two Part |
| Two |
Color |
| Colorless |
Viscosity (Base) | cP | 5100 |
| Pa-sec | 5.1 |
Viscosity (Mixed) | cP | 3500 |
| Pa-sec | 3.5 |
Thermal Conductivity | btu/hr ft °F | 0.15 |
| W/m °K | 0.27 |
Specific Gravity (Cured) |
| 1.03 |
Working Time at 25°C (Pot Life - Hours) | hours | 1.5 |
Cure Time at 25°C | hours | 48 |
Heat Cure Time at 100°C | minutes | 35 |
Heat Cure Time at 125°C | minutes | 20 |
Heat Cure Time at 150°C | minutes | 10 |
Durometer Shore |
| 43 |
Dielectric Strength | volts/mil | 500 |
| kV/mm | 19 |
Volume Resistivity | ohm*cm | 2.9E+14 |
Dissipation Factor at 100 Hz |
| 0.00257 |
Dissipation Factor at 100kHz |
| 0.00133 |
Dielectric Constant at 100 Hz |
| 2.72 |
Dielectric Constant at 100 kHz |
| 2.68 |
Linear CTE (by DMA) | ppm/°C | 340 |
Tensile Strength | PSI | 980 |
| MPa | 6.7 |
| Kg/cm2 | 69 |
Refractive Index | @ 589 nm | 1.4118 |
Refractive Index | @ 632.8 nm | 1.4225 |
Refractive Index | @1321 nm | 1.4028 |
Refractive Index | @ 1554 nm | 1.3997 |
UL RTI Rating | °C | 150 |
19.9㎏ pail | $1,718.35 |